OZT-SH-124LM1，OZT-SS-124LM1，OZT-SH-112LM1，OZT-SS-148LM1，OZT-SH-148LM1 OZT-SS-112LM1,200 TE 内部编号： 3-1440002-6 触点额定电流 = 16 A 端子类型 = PCB-THT 触点组合形式 = 1 Form A (NO) Contact - Current Class 10A to 20A Class, Greater Than 16A 触点额定电流 (A) 16 Contact - Limiting Continuous Current (A) 16 Contact - Limiting Making Current (A) 16 Contact - Limiting Breaking Current (A) 16 Insulation - Initial Dielectric Between Coil/Contact Class >4000V Class Insulation - Initial Dielectric Between Open Contacts (V rms) 1000 介电强度 － 线圈接触体 (V rms) 5000 Contact - Rated Voltage (VAC) 240 Contact - Switching Voltage Max. (VAC) 240 Contact - Switching Voltage Max. (VDC) 24 Contact - Limiting Short-Time Current (A) 16 Contact - Switching Recommended Load, Min. 100mA at 5V 线圈电压 (VDC) 12 线圈电阻 (Ω) 270 额定线圈功率 (mW) 540 Coil - Rated Power Class 500mW to 600mW Class Insulation - Initial Insulation Resistance (MΩ) 1000000 Insulation - Creepage Class 5.5mm to 8mm Class Insulation - Clearance Class 5mm to 8mm Class FCC 68 绝缘认证 10000V Initial Surge Withstand Voltage between Contacts and Coil 尺寸 Mechanical - Length Class 25mm to 30mm Class 长度 (mm [in]) 29.21 [1.150] Mechanical - Width Class 12mm to 16mm Class 宽度 (mm [in]) 12.80 [0.504] Mechanical - Height Class 20mm to 25mm Class 高度 (mm [in]) 20.60 [0.811] ontact Material AgSnO Contact - Number of Poles 1 触点组合形式 1 Form A (NO) 线圈励磁系统 Monostable, DC Coil - Special Features Sensitive Version, UL Coil Insulation Class A 行业标准 符合RoHS/ELV标准 符合RoHS标准, 符合ELV 标准 无铅焊接制程 波峰焊最高可达260°C, 波峰焊最高可达240°C, 波峰焊最高可达265°C RoHS/ELV 符合记录 改为符合 RoHS 指令 Approved/Registered Standards CSA, TUEV, VDE, CQC 环境 Environmental - Category of Protection RTIII Environmental - Ambient Temperature, Max. (°C [°F]) 70 [158] Environmental - Ambient Temperature Class 50°C to 70°C Class