PCFN-124D2M,000 TE 内部编号： 1461193-9 产品亮点 浏览所有 产品系列 = PCF Contact - Current Class = 20A to 30A Class, Greater Than 16A 触点额定电流 = 25 A 端子类型 = PCB-THT 触点组合形式 = 1 Form A (NO) 电气特点 Contact - Current Class 20A to 30A Class, Greater Than 16A 触点额定电流 (A) 25 Contact - Limiting Continuous Current (A) 25 Contact - Limiting Making Current (A) 25 Contact - Limiting Breaking Current (A) 25 Insulation - Initial Dielectric Between Coil/Contact Class >4000V Class Insulation - Initial Dielectric Between Open Contacts (V rms) 1000 介电强度 － 线圈接触体 (V rms) 5000 Contact - Rated Voltage (VAC) 277 Contact - Rated Voltage (VDC) 24 Contact - Limiting Short-Time Current (A) 25 Contact - Switching Recommended Load, Min. 100mA at 1V 线圈电压 (VDC) 24 线圈电阻 (?) 640 额定线圈功率 (mW) 900 Coil - Rated Power Class 800mW to 1000mW Class Insulation - Initial Insulation Resistance (M?) 1000000 Insulation - Creepage Class 5.5mm to 8mm Class Insulation - Clearance Class 5mm to 8mm Class FCC 68 绝缘认证 8000V Initial Surge Withstand Voltage between Contacts and Coil 尺寸 Mechanical - Length Class 30mm to 35mm Class 长度 (mm [in]) 30.40 [1.197] Mechanical - Width Class 12mm to 16mm Class 宽度 (mm [in]) 16.00 [0.630] Mechanical - Height Class 25mm to 30mm Class 高度 (mm [in]) 26.50 [1.043] Insulation - Clearance Between Contact and Coil (mm [in]) 6.7 [0.264] Insulation - Creepage Between Contact and Coil (mm [in]) 8 [0.315] 主体特性 安装方式 PCB 重量 (g [oz]) 28.00 [0.988] 触点特性 端子类型 PCB-THT Contact Material AgSnO Contact - Number of Poles 1 配置特性 触点组合形式 1 Form A (NO) 线圈励磁系统 Monostable, DC 行业标准 符合RoHS/ELV标准 符合RoHS标准, 符合ELV 标准 无铅焊接制程 波峰焊最高可达260°C, 波峰焊最高可达240°C, 波峰焊最高可达265°C RoHS/ELV 符合记录 改为符合 RoHS 指令 Approved/Registered Standards CQC, UL, TUEV PCFN-106D2M PCFN-109D2M PCFN-112D2M PCFN-124D2M